FICO shear spray system
Version V 3.3
Ref. CEN0198
The FICO shear spray system is used for the metering,
mixing and spraying of the water/lubricant mixture which
is then used for the cooling and lubrication of the glass
gob shears.
FEATURES
- Spraying capacity: 0 - 480 liters of mixture / hour.
- Water required: reverse osmosis or demineralized water.
- Lubricant required: water soluble or emulsifiable.
- Ratio: adjustable from 1: 100 to 1: 1500 (1% to 0.06%).
- Mechanical agitation at variable speed.
- Power supply: 400 Volts - 3 phases + earth.
- Absorbed power: 5 kWh.
- Dimensions (mm): L. 1480 x l. 942 x H. 1800.
- Integrated retention tank. Empty weight: 420 kg.
AUTOMATION
- PROFACE PLC / touchscreen terminal (HMI).
- Continuous, graphical and historical display of the concentration, the consumption of the mixture sprayed per feeder, pressures, flow rates and temperatures.
- Remote display and operation of display screens: setting of setpoint thresholds, recovery and monitoring of FICO Central activities (via Ethernet link).
- Data exchange for recovery in the factory supervision using MODBUS TCP / IP mode.
- USB mass storage and export of data and incident history (in Excel format) over approximately 10 days.
- 2 withdrawable relays for remote signaling of FICO control unit faults and flash signaling.
- Integrated stainless steel manifold for mixture distribution: one mixture outlet for each feeder. Each mixture spray line is equipped with a digital display flow-rate sensor(located above the FICO control unit or close to the production line).
MAINTENANCE
Weekly frequency, duration 20 minutes.
